Nor-Cal Home
Members
Gallery
Evemts
Locations
 
 
 
 

Warning: uksort() [function.uksort]: Array was modified by the user comparison function in /home/content/r/c/c/rccrawlermedia/html/editor/inc/shows.inc.php on line 363
Smokinu by rc
Driver: Marcus
Nickname: Madman
Body: Jeep Rubicon
Chassis: SW2
Axles: TLT
Motor: 35 t lahte
Transmission: magnum 272
Tires: proline moabs/ imex swampers/geolanders
Rims: Stampede front /nitro rustler rear
Steering Servo: hitec 645
Battery Size/Type: 6 cell 3k orion
Vehicle Weight: 6+ lbs
Wheelbase: 12.5
Belly Clearance: 2.5"
Speed Controller: Novak XRS
Other Noteables: its supposed to be scale and has internal spring shocks now.


Will
Driver: Will
Nickname: None
Body: Stock TXT without doors
Chassis: Hosstyle Custom
Axles: TXT
Motor: Stock TXT
Transmission: TXT with Maxx Shafts & GD600
Tires: TXT grooved & cut foams
Rims: TXT
Steering Servo: Hitec 645MG
Battery Size/Type: Cheap 3000 nimh
Vehicle Weight: n/a
Wheelbase: 15.5"
Belly Clearance: 5"
Speed Controller: Beater Old Futaba
Other Noteables: Budget Built but has a Cool windshield sticker! and polished lower links - cheap bling.


51504rock
Driver: Dustin
Nickname: 51504rock

Rig #1
Body: Rock Pleazer
Chassis: SW2
Axles: TLT
Motor: Lathe 55T
Transmission: Stampede
Tires: 2.2 Pro-Line Moab
Rims: RC4WD Narrow Beadlock Wheels
Steering Servo: HiTec 5955
Battery Size/Type: 6 3300mah
Vehicle Weight: 8"
Wheelbase: 12 1/2"
Belly Clearance: 3"
Speed Controller: Novak Super Rooster
Other Noteables: Gmade 2.2" Wheel Widener

Rig #2
Body: Rock Pleazer
Chassis: Stick
Axles: Clod
Motor: 2x Lathe 55T
Transmission: N/A
Tires: Pro-Line Xl Moab
Rims: Pro-Line Beadlock
Steering Servo: 2x HiTec 5955
Battery Size/Type: 8 cell 2200mah
Vehicle Weight: 10"
Wheelbase: 16"
Belly Clearance: 6"
Speed Controller: Novak Super Rooster
Other Noteables: 23mm wheel adapters
Rig #1


Rig #2


PaloAltoK5
Driver: Art
Nickname: PaloAltoK5
Body: Pro-line Chevy C-10 or Ford F-650 Superduty
Chassis: RockBull II
Axles: Clod
Motor: Integy 65t Lathes
Transmission: N/A
Tires: Redrocks or Moab XL's
Rims: RC4WD Narrowed Beadlocks or Pro-line 40 series Comandos
Steering Servo: HS-945 front & rear
Battery Size/Type: 2 epic 3000 mh Ni-mh
Vehicle Weight: 12 lbs or so..
Wheelbase: 16"
Belly Clearance: 5" or so depending on tires
Speed Controller: Novak Super Duty
Other Noteables: 8t pinions & lot's of BLING!! LOL


SlinkySam
Driver: Sam Silveira
Nickname: SlinkySam, Token


Rig #1
Body: Jeep Rubicon
Chassis: Custom aluminum ultralight
Axles: TLT-1
Motor: Lathe 55T
Transmission: Losi-XXX
Tires: Pro-Line Moabs
Rims: Traxxas Nitro Rustler
Steering Servo: HiTec HS645
Battery Size/Type: 6 Cell 3000
Vehicle Weight: 4.3 lbs
Wheelbase: 12"
Belly Clearance: 3"
Speed Controller: Novak Rooster
Other Noteables: Tested and proven that electronics don't work well under water.

Rig #2
Body: Custom tube buggy with panels
Chassis: Custom tube buggy
Axles: TLT-1
Motor: Lathe 55T
Transmission: Losi-XXX
Tires: Pro-Line Masher 2Ks
Rims: HPI 5 Spoke
Steering Servo: HiTec HS645
Battery Size/Type: 6 Cell 3000
Vehicle Weight: 7 lbs
Wheelbase: 12.75"
Belly Clearance: 3.5"
Speed Controller: Novak Rooster
Other Noteables: 2005 Nor-Cal rock crawling series champion, 4 wheel steering, unusual front link design, driver's seat
Jeep Rubicon



Cobra Tube Buggy


Hoss
Driver: Jeff
Nickname: Hoss
Body: HPI Rubicon
Chassis: Hacked TXT / Custom
Axles: Custom Maxx Straight, MIP CVD's, & Spooled
Motor: 27T in Modified Can
Transmission: E-Maxx with 2nd gears removed, Revo Shafts & GD600
Tires: Associated BFT's grooved & cut foams
Rims: Cut Imex
Steering Servo: Hitec 645MG
Battery Size/Type: Cheap 3000 nmhi
Vehicle Weight: n/a
Wheelbase: 15.25"
Belly Clearance: 4.5"
Speed Controller: Novak Super Chicken
Other Noteables: Cool windshield sticker! & D-ring for 2.2's or anythign with a Cruiser body.


Tank
Driver:Ryan Pace
Nickname:Tank
Body: Jeep
Chassis: hacked TLT
Axles: TLT
Motor: Integy 55t
Transmission: Stampede
Tires: Pro-Line Moabs
Rims: Trax
Steering Servo: Hitec HS-5645MG
Battery Size/Type: Reedy black lab2 3300 stick
Vehicle Weight: ~ 6lbs
Wheelbase: 12.2"
Belly Clearance: 3"
Speed Controller: Dynamite tazer (dyn4910) with the reverse deley off
Other Noteables: None


Nluvwithxlr8ing
Driver: Brandon Coonce
Nickname: Nluvwith (insert something here)
Body: HPI rubicon
Chassis: SW2
Axles: TLT
Motor: 55t lathe
Transmission: Stampede
Tires: Pro-Line Moabs
Rims: HPI Spike
Steering Servo: Hitec 945
Battery Size/Type: 2/3 A 7 cell hump IB 1400
Vehicle Weight: 6+ Pounds
Wheelbase: 12.5"
Belly Clearance: Around 2.25"
Speed Controller: Super Rooster
Other Noteables: Painted by me


RckJeep
Driver: Dave
Nickname: RCKJeep, Mr.4wd

Rig #1
Body: Toyota Cab
Chassis: Custom
Axles: TLT
Motor: 55t Lathe
Transmission: Stampede
Tires: Pro-LineMoab
Rim: DuuraTrax Maximum ST's
Steering Servo: Futaba S3305
Battery Size/Type: 3000 NiMH/ stick
Vehicle Weight: a lot
Wheelbase: 12.5"
Belly Clearance: 2.5"
Speed Controller: Rooster
Other Noteables: winch, spare tire, exo, DP Fab 3rd gen. Rockrings

Rig #2
Body: 50's Chevy & Jeep CJ8
Chassis: DP Fab Rockstar
Axles: TLT
Motor: 55t Lathe
Transmission: Stampede
Tires: Pro-Line Moab
Rims: DuraTrax Maximum ST's
Steering Servo: Futaba S3305
Battery Size/Type: 3000 NiMH
Vehicle Weight: not a lot
Wheelbase: 11.875"
Belly Clearance: 2.75"
Speed Controller: Super Rooster
Other Noteables: flame paint job, painted DP Fab 3rd gen. Rockrings
Toyota



50's Chevy Truck


Chino63
Driver: Dean Hsiao
Nickname: chino, minge, iron chef

Rig #1
Body: Pro-Line fj40
Chassis: Bruiser
Axles: TLT-2
Motor: 55t lathe
Transmission: Losi
Tires: Pro-Line Moabs
Rims: RC4wd
Steering Servo: hitec 5645
Battery Size/Type: Orion Super Duty 3000
Vehicle Weight: 7lb give or take
Wheelbase: 11.5"
Belly Clearance: 2.5"
Speed Controller: Rebel 2
Other Noteables: Winch, 10,000,000 candle power lights, custom rack, stinger, less suspension travel than on your rig.


Rig #1
Body: Modded Pro-Line fj40 to fj45
Chassis: Bruiser
Axles: Bruiser
Motor: 55t Lathe
Transmission: RC4wd
Tires: Pro-Line Masher 2Ks
Rims: Bruiser/Stampede
Steering Servo: hitec 5645
Battery Size/Type: Orion Super Duty 3000
Vehicle Weight: 7lb give or take
Wheelbase: 12.5"
Belly Clearance: 2.75"
Speed Controller: Super Rooster
Other Noteables: Custom aluminum bed on the fj45 (not finished yet), half leaf front suspension.
FJ-40 Cruiser



FJ-45 Cruiser


Halfcab
Driver: Todd Singer
Nickname: Halfcab
Body: F100/Bronco Halfcab
Chassis: Bruiser/ Minge modified
Axles: TLT/blackfoot stubs/full bearings
Motor: 55 Turn Lathe
Transmission: Losi mf2
Tires: moab 2.2
Rims: Pro-Line Aggressors
Steering Servo: HiTec HS645
Battery Size/Type: 6 cell gp 3300's
Vehicle Weight: N/A
Wheelbase: 11.75"
Belly Clearance: 2.75"
Speed Controller: Super Rooster
Other Noteables: 55t integy lathe/ hs645mg/ 5oz, lead shot in each wheel


SicJ
Driver: Jered Larson
Nickname: Sicj
Body: N/A
Chassis: Custom 3/16" Tube Chassis
Axles: TLT w/ quick-change axle shafts
Motor Type: 45T Lathe
Transmission: AE Stealth
Tires: Pro-Line M2K's
Rims: Tower ST's
Steering Servo: Hitec 5945 MG
Battery Size/Type: LiPo 2 cell 1900mah
Vehicle Weight: 6+ lbs.
Wheelbase: 12.75"
Belly Clearance: 2 1/8"
Speed Controller: Tekin Rebel 2
Other Noteables: Chassis designed after Spidertrax's XTS buggy


Badger
Driver: John Hubbard
Nickname: Badger, Gary, the Swedish Chef

Rig #1
Body: HPI Bronco
Chassis: SW2
Axles: TLT
Motor: Lathe 55T
Transmission: Pede
Tires: HPI Geolanders
Rims: Traxxas
Steering Servo: Airtronics 94359Z
Battery Size/Type: IB1400 2/3 7 cell pack
Vehicle Weight: 6 lbs 10 oz.
Wheelbase: 11 1/4"
Belly Clearance: 2.5"
Speed Controller: Tekin Rebel 2
Other Noteables: 8 1/2" track width

Rig #2
Body: Mountaineer cab/ custom flatbed
Chassis: Mountaineer/Bruiser
Axles: Mountaineer/Bruiser
Motor: Lathe 55T
Transmission: Pede
Tires: HPI Geolanders
Rims: Mountaineer
Steering Servo: Hitec HS945MG
Battery Size/Type: IB1400 2/3 7 cell pack
Vehicle Weight: 8+ lbs
Wheelbase: Unknown
Belly Clearance: 2.5"
Speed Controller: Super Rooster
Other Noteables: Hitec HS-5945MG servo for the winch
Rig #1


Rig #2


Bernie
Driver: Bernie Martin
Nickname: Blue Devil Toyota
Body: Buggy
Chassis: Modified Junfac feather-lite
Axles: Clod
Transmission: Clod
Tires: Moab XL's
Rims: Proline Cheyenne's with custom outer rings
Battery Size/Type: 7 cell 4200's
Vehicle Weight: 12 pounds baby
Wheelbase: 15"
Belly Clearance: 2 1/4"
Speed Controller: Tekin Rebel 2
Other Noteables: alum knuckles, CVD's, can drive upside down


 
Home | Members | Gallery | Events | Crawl Locations